HOW TO ADJUST THE DEPTH OF FIELD

HOW TO ADJUST THE DEPTH OF FIELD 02 After Effects EN
AYANA
AYANA

Hello everyone!

I’m Ayana, a Vtuber!

Today, I will explain how to adjust the depth of field!

AYANA
AYANA

Let’s begin!

Let’s start!

The depth of field refers to the range of focus, and by adjusting the depth of field, the focus of the camera can be blurred or focused.

Now we will go to adjust the depth of field!

Selecting the camera to adjust the Depth of Field

First, in the Timeline panel, select the camera layer for which you want to adjust the Depth of Field.

Open Camera settings

You can adjust the Depth of Field by opening Camera Settings, but there are three ways to open Camera Settings.

The first method is to select Camera Settings from Layer tab on the menu bar.

The second method is to double-click the camera layer in the Timeline panel.

The third method is to select the camera layer you want to adjust and press the shortcut Ctrl+Shift+Y on the keyboard .

Then the Camera Settings dialog box appears like this.

Adjust Camera Settings

In order to adjust the Depth of Field, first check the Enable Depth of Field item in Camera Settings and uncheck Lock to zoom.

By changing the value of Focus Distance, the focus of the composition panel changes in real time, so you can adjust it while checking its blurring. However, please note that in order to check blurring in real time, the view must be set to Active Camera or Camera 1.

When you select “Show rulers” from the View tab on the menu bar, the ruler is displayed on the composition panel, so you can measure the approximate distance.”

Next, adjust the Focus distance and Aperture in order to focus only on the front layer and make the back layer blurry.

First, set the Focus Distance to 600mm and the Aperture to 0mm.

In this way, both the front layer and the back layer are in focus.

Let’s set the Focus Distance to 600mm and set the Aperture to 100mm.

The back layer becomes a little blurred like this.

Let’s make the Aperture 200mm. If you increase the Aperture value, you can see that the F-Stop value decreases accordingly.

The back layer has become blurred like this.

Next, let’s set the focus distance to 900mm while keeping the Aperture at 200mm.

The front layer is blurred and the back layer is in focus.

Finally, let’s set the Focus Distance to 900mm and set the Aperture to 0mm.

Both the front and back layers are in focus, but compared to the first one, you can see that it is zoomed in.

This is the end of the lecture on how to adjust the Depth of Field!

AYANA
AYANA

How is everyone doing?

Did you understand today’s lecture?

See you again for the next lecture!

See you soon! Bye bye!

コメント

タイトルとURLをコピーしました